Posted on: 1 December 2014
When it comes time to start putting up holiday lights on the interior and exterior of your home, it is important that you ensure your lights are safe. This is because home fires are very common during the holiday season. If you aren't careful, your lighting display could contribute to that fire. Here are six tips to help ensure that your lighting display is installed safely:
1. Avoid Connecting Different Number Light Sets Together.
When connecting one set of lights to another set of lights, make sure that each set contains the same number of lights. For example, you want to connect a 100 light set with another a 100 light set. However, you do not want to connect a 100 light set with a 50 light set. The reason behind this is that the light set with fewer lights will burn out prematurely.
2. Always Use a Surge Protector.
To protect your outlets from being overloaded, it is wise to use a surge protector. This will help reduce circuit overloads and protect your lighting display from voltage spikes. Surge protectors should always be used in the home, but are incredibly important when you are placing a heavy burden on your home's electrical system, such as with holiday lighting.
3. Avoid Overloading Your Extension Cords.
Just about everyone is guilty of plugging in too many things into one extension cord. However, it isn't a mistake that should be made over and over, as it is a major fire risk. Lights can burn out or circuits could fail, which further increases the overall risk of a fire igniting in the home. Use multiple outlets in order to reduce the circuit load.
4. Use the Right Lights in the Appropriate Place.
There is a clear difference between outdoor and indoor lights. If you use indoor lights outside, it can cause electrical shorts, premature burnout and even fires. Therefore, before you put up your holiday display of beautiful lights, make sure that you are stringing the right set of lights.
5. Watch the Voltage and Bulb Type.
If you ever need to replace a bulb in your string of lights, it is crucial that you know that all lights are not the same. The type of bulb and the voltage of those lights vary. In order to preserve your lighting display, it is critical that you become familiar with this. For example, a string of 50 lights is going to have different bulbs than a string of 35 lights.
6. Opt for LED bulbs.
It takes a lot of electricity to light up your home for the holidays. Luckily, there is a way to help you save money while also being eco-friendly. All it takes is you using LED replacement bulbs for your lights. These bulbs can last up to 20 times longer and can earn you savings of as much as 80 percent.
Before you hang up your lighting display, you may want to schedule an inspection with an electrician, such as Copperhead Electric. He or she can come out and examine your electrical system to ensure no upgrades are necessary to power your lights.Share